Tags |
|
|
Links |
|
|
Will You Add? - How To Ship Stained Glass
Production label printers use thermal technology to print high-resolution product information and bar codes on different varieties of labels. Some printers use direct thermal method to print information on heat sensitive paper whereas others use thermal transfer method in which heat is used to transfer ink from ribbons onto labels for getting permanent prints.Mostly courier companies, warehousing, and manufacturing companies use production label pr
Next we got some friends to help flip the whole assembly over.
Then we laid the final piece of plywood down and screwed it in place.
When we ship, we find that moving van lines have a good system in place to haul sensitive and delicate items, such as electronics and stained glass. They cost 3 or 4 times more than common carrier, but you get what you pay for.
We took pictures for this article that can be viewed at http://www.betterstainedglass.com/Newslette
Is Your Corporate Wellness Program Floundering?Companies are instituting corporate wellness programs, often with mixed results. The idea behind a corporate wellness program is actually quite solid: these programs are opportunities for employees to get the help they need to prevent illness.The general idea of a corporate wellness program is that since as many as 80% of illnesses can be avoided with some preventative care, more attention to co
By building a custom crate for each piece of glass that you plan to ship, you will have better success shipping glass across country. You will find that by building a crate in the following manner that you will be able to ship small windows using common carriers like UPS or Fedex.
We have the stained glass panel laid out on a different table than the one we're going to build the crate on.
First we lay the 1" thick rigid foam insulation on the table. This comes in pink or blue depending on the brand you buy.
We lay the panel to be shipped on top of the insulation and use a box knife to cut around the panel. We cut right on the edge. We don't want any extra foam hanging beyond the window edge.
Then we slide the cut line of the foam over the edge of the table and push down to break the foam. If it has a membrane holding it together, we run a utility knife along it to cut it off. We use the cut off pieces as a template to cut the second piece of foam the same size as the first.
Then we take a two by four and use it as a pattern to cut four pieces of filler pieces of foam.
Here we have the "foam, glass, foam sandwich," with some of our cut pieces laying on top.
Next we take the long pieces and cut them to the length of the sign and set one on each side of the sign. Then we stand up a two by four along the long edge and mark a cut line a two by four width from the end of the sign.
(We make sure that the other end of the two by four is hanging out a two by four width at the other end when marking) The cut two by four is then cut a saw blade width short so the box will keep the foam tight. We cut a second one for the other side.
Here is the foam "sandwich" with another piece of scrap foam on top of the pile to raise the top of the entire package to the height of the two by four frame. You can also see the two by four side piece ready to be put in place.
Now we use a clamp to pull the two by fours together on each end. We only apply a slight amount of pressure to the clamp. We want the crate to be tight but not so tight we damage the foam and drive it into the stained glass we're protecting.
We cut and attach our connecting two by fours. Then we check that the top of the crate is even with the two by four framework. Then we add a couple of layers of foam blanket to the top so that the lid of the crate will apply a slight amount of pressure when it's in place.
Because we have an inch of foam on the top and bottom and all around the glass inside the crate, it is safe to screw down the plywood top of the crate. We laid the plywood on top of the framework and traced around it and then cut it out.
Next we got some friends to help flip the whole assembly over.
Then we laid the final piece of plywood down and screwed it in place.
When we ship, we find that moving van lines have a good system in place to haul sensitive and delicate items, such as electronics and stained glass. They cost 3 or 4 times more than common carrier, but you get what you pay for.
We took pictures for this article that can be viewed at http://www.betterstainedglass.com/Newsletter
While referrals are one of the most important sources of new clients for therapists and coaches, how to get them seems to be something of a mystery. Below is a five-step referral strategy that can switch on your referral faucet, or turn a trickle into a steady flow.#1-Focus on Your Ideal Clients
Do you want to work with men in career transition? People dealing with health issues? Families in crisis? Females with eating disorders? Newly retir
We lay the panel to be shipped on top of the insulation and use a box knife to cut around the panel. We cut right on the edge. We don't want any extra foam hanging beyond the window edge.
Then we slide the cut line of the foam over the edge of the table and push down to break the foam. If it has a membrane holding it together, we run a utility knife along it to cut it off. We use the cut off pieces as a template to cut the second piece of foam the same size as the first.
Then we take a two by four and use it as a pattern to cut four pieces of filler pieces of foam.
Here we have the "foam, glass, foam sandwich," with some of our cut pieces laying on top.
Next we take the long pieces and cut them to the length of the sign and set one on each side of the sign. Then we stand up a two by four along the long edge and mark a cut line a two by four width from the end of the sign.
(We make sure that the other end of the two by four is hanging out a two by four width at the other end when marking) The cut two by four is then cut a saw blade width short so the box will keep the foam tight. We cut a second one for the other side.
Here is the foam "sandwich" with another piece of scrap foam on top of the pile to raise the top of the entire package to the height of the two by four frame. You can also see the two by four side piece ready to be put in place.
Now we use a clamp to pull the two by fours together on each end. We only apply a slight amount of pressure to the clamp. We want the crate to be tight but not so tight we damage the foam and drive it into the stained glass we're protecting.
We cut and attach our connecting two by fours. Then we check that the top of the crate is even with the two by four framework. Then we add a couple of layers of foam blanket to the top so that the lid of the crate will apply a slight amount of pressure when it's in place.
Because we have an inch of foam on the top and bottom and all around the glass inside the crate, it is safe to screw down the plywood top of the crate. We laid the plywood on top of the framework and traced around it and then cut it out.
Next we got some friends to help flip the whole assembly over.
Then we laid the final piece of plywood down and screwed it in place.
When we ship, we find that moving van lines have a good system in place to haul sensitive and delicate items, such as electronics and stained glass. They cost 3 or 4 times more than common carrier, but you get what you pay for.
We took pictures for this article that can be viewed at http://www.betterstainedglass.com/Newslette
Within a six year period Sir Christopher Bland managed to turn around the fortunes of a then ailing BT into a possible global player in the telecoms arena. His applause during the presentation of the latest figures is well deserved. He truly took a dead government department and pushed it into a new age business.So what happened to the Post Office? Nothing, of course, but that is not the point. Of course BT was operating in an environment of teleco
Next we take the long pieces and cut them to the length of the sign and set one on each side of the sign. Then we stand up a two by four along the long edge and mark a cut line a two by four width from the end of the sign.
(We make sure that the other end of the two by four is hanging out a two by four width at the other end when marking) The cut two by four is then cut a saw blade width short so the box will keep the foam tight. We cut a second one for the other side.
Here is the foam "sandwich" with another piece of scrap foam on top of the pile to raise the top of the entire package to the height of the two by four frame. You can also see the two by four side piece ready to be put in place.
Now we use a clamp to pull the two by fours together on each end. We only apply a slight amount of pressure to the clamp. We want the crate to be tight but not so tight we damage the foam and drive it into the stained glass we're protecting.
We cut and attach our connecting two by fours. Then we check that the top of the crate is even with the two by four framework. Then we add a couple of layers of foam blanket to the top so that the lid of the crate will apply a slight amount of pressure when it's in place.
Because we have an inch of foam on the top and bottom and all around the glass inside the crate, it is safe to screw down the plywood top of the crate. We laid the plywood on top of the framework and traced around it and then cut it out.
Next we got some friends to help flip the whole assembly over.
Then we laid the final piece of plywood down and screwed it in place.
When we ship, we find that moving van lines have a good system in place to haul sensitive and delicate items, such as electronics and stained glass. They cost 3 or 4 times more than common carrier, but you get what you pay for.
We took pictures for this article that can be viewed at http://www.betterstainedglass.com/Newslette
Travel a lot on business?Wish you could breeze into a town with a briefcase and laptop and have an office ready for you? That’s not as farfetched as it sounds. Not if you know about executive suites and how they operate.Executive suites is a term used to describe rental offices in cities all over the U.S. and abroad. They are also referred to as ‘shared office space’. However, neither the term ‘executive suites’ or ‘shared office spac
Now we use a clamp to pull the two by fours together on each end. We only apply a slight amount of pressure to the clamp. We want the crate to be tight but not so tight we damage the foam and drive it into the stained glass we're protecting.
We cut and attach our connecting two by fours. Then we check that the top of the crate is even with the two by four framework. Then we add a couple of layers of foam blanket to the top so that the lid of the crate will apply a slight amount of pressure when it's in place.
Because we have an inch of foam on the top and bottom and all around the glass inside the crate, it is safe to screw down the plywood top of the crate. We laid the plywood on top of the framework and traced around it and then cut it out.
Next we got some friends to help flip the whole assembly over.
Then we laid the final piece of plywood down and screwed it in place.
When we ship, we find that moving van lines have a good system in place to haul sensitive and delicate items, such as electronics and stained glass. They cost 3 or 4 times more than common carrier, but you get what you pay for.
We took pictures for this article that can be viewed at http://www.betterstainedglass.com/Newslette
You know - the decision you make when selecting a Merchant Account provider may be much more important than you think. Why? Because you will rely on their service many times a day,
as you take in credit card payments for your business.The fees your merchant account provider charges, as a percentage of sales, will add up to tens of thousands, even hundreds of thousands of dollars, over the course of a few years!Bad or mediocre customer serv
Next we got some friends to help flip the whole assembly over.
Then we laid the final piece of plywood down and screwed it in place.
When we ship, we find that moving van lines have a good system in place to haul sensitive and delicate items, such as electronics and stained glass. They cost 3 or 4 times more than common carrier, but you get what you pay for.
We took pictures for this article that can be viewed at http://www.betterstainedglass.com/Newsletter/Archives/2005julyhow2ship/july2005how2ship.htm
HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.atriclecheck.com/article/2989/atriclecheck-How-To-Ship-Stained-Glass.html">How To Ship Stained Glass</a>
BB link (for phorums):
[url=http://www.atriclecheck.com/article/2989/atriclecheck-How-To-Ship-Stained-Glass.html]How To Ship Stained Glass[/url]
Related Articles:
Business Angles and Sportsbetting
The Purpose of a Credit Card Processing Company
Bookmark it:
|